Machine description

PRIESS and HORSTMANN drilling and insertion machine

For commission-controlled drilling and pressing of hinges as well as for drilling

Of handle and locking holes and recesses for special fittings and additional holes on the doors up and down.

The basic machine consists of a solid, torsion-resistant frame with precision guides
Record the units.

Control cabinet for machine control (electro-pneumatic control) can be installed

Opposite the loading position (see installation plan) screen with controls

The swivel arm is located on top of the switch cabinet in a swivel bracket above the insertion position.

Electrical connection: 400 V +/- 10%, 50 Hz (3 phases with load-bearing neutral conductor), approx.
12 kW. According to VDE0100-T482, the system must be secured by a Fl switch.

Maintenance unit: R 1/2 "with pressure monitoring and air tank, operating pressure 6-7 bar.

Suction: min. 32 m / s air speed to the respective nozzle of the units (vacuum 2200 Pa.).
Painting:

Machine and control cabinet pebble gray (RAL 7032)
Supports and protective grille fire red (RAL 3000)
Suction hoods and motors matt black (RAL 9005)
Electrical, pneumatic and other purchasing elements in accordance with the P + H standard.
Workpiece dimensions:

• Length: 300 mm -2500 mm
• Width: 200 mm- 800 mm
• Thickness: 16mm -30mm
• The width of the workpiece must not be larger than the workpiece length!
• Working height: 970 mm

Servo positioning system:

Setpoint and actual value output and display for the axes by the CNC control.

Positioning via ball-bearing spindles with backlash-free nut and highly dynamic,

Digital three-phase servomotors with clocked 4-quadrant controllers.

Travel speed 70 m / min. (X / Y axes).
Drilling cycle approx. 2 sec.
Press in approx. 3 seconds


CNC Control,

Comfortable CNC screen control (Ferrocontrol) with 1 0.4 "TFT color monitor
And a dust-proof keyboard in a lectern.
Practice-oriented and proven operating software with screen recorder
For all input and control functions with function keys, the meaning in plain text on the screen.
The workpieces are called up for production using a multi-part drilling code.
Additional parameters, part dimensions, stop and the number of articles can be expanded through programming variants.
The drilling patterns are saved on an external PC (host computer) that is connected online to the machine. New drilling patterns are entered on the master computer


Servo positioning system:

Setpoint and actual value output and display for the axes by the CNC control.
Positioning via ball-bearing spindles with backlash-free nut and highly dynamic,
Digital three-phase servomotors with clocked 4-quadrant controllers.
Travel speed 70 m / min. (X / Y axes).
Drilling cycle approx. 2 sec.
Press in approx. 3 seconds
CNC sieve control,

Convenient CNC screen control
(Ferrocontrol) with 1 0.4 "TFT color monitor
And a dust-proof keyboard in a lectern.
Practice-oriented and proven operating software with screen recorder
For all input and control functions with function keys, the meaning in plain text on the screen.
The workpieces are called up for production via a multi-part drilling code, in which programming variants, additional parameters, part dimensions, stop and number of pieces can be expanded.
The drilling patterns are saved on an external PC (host computer) that is connected online to the machine. New drilling patterns are entered in the guide

Integrated, freely programmable control (FPS) for optimal work processes and maximum
Operational safety. Error diagnosis via LEDs and plain text displays on the screen, special service routines for easy troubleshooting.
Operation of the machine:
The workpiece to be processed is manually guided onto the inlet roller conveyor in front of the guide roller
Drill and pressed against the longitudinal stop. After pressing the start button, the workpiece is transported into the machine and then transferred in the longitudinal direction via the positionable stop X1 under a measuring light barrier in the transverse direction while maintaining the length and length
Wide tolerance. When length and width are the same. Is the workpiece clocked from the processing station via stop X1? The processing takes place from above and from I or from below (see machine equipment). That finished bored
The workpiece is pushed onto the discharge table, lifted (partially used) and can then be processed manually on the work table.


Machine equipment:

1.) 1 serial interface (RS 232) for connecting a PC as a programming station
And for data backup. Max. Cable length without converter 20m.
2.) 1 serial interface (RS 232) for connecting a modem for remote maintenance.
The modem is included in the scope of delivery;
TAE socket (selectable). The modem
Can be accepted after the warranty period has expired.

3.) 1 programming software on IBM or compatible PCs, operating system
Windows 95 or WIN_NT

(technical data subject to change, as information provided by the manufacturer)