HOMAG HOMAG ELTEC CPU Card BAB40 without graphics without SCSI Part No. 2-083-03-0092 2083030092 BAB 400 4 Software 3 012 05 1940 Part No. 2-083-03-0092-3
HOMAG HOMAG ELTEC CPU Card BAB40 without graphics without SCSI Part No. 2-083-03-0092 2083030092 BAB 400 4 Software 3 012 05 1940 Part No. 2-083-03-0092-3 is backordered and will ship as soon as it is back in stock.
Pickup available at Wiesengrund 7
Usually ready in 4 hours
Reviewed Articles
Reviewed Articles
Our tested articles at www.sondermann.org stand for the highest quality and reliability. Every article is carefully checked to ensure it meets our high standards. This way, you can be sure that you will only receive flawless products from us that meet the highest demands. Trust in tested quality!
Value for money
Value for money
Used spare parts are not only significantly cheaper than new parts, but with careful inspection and reconditioning, they offer almost equivalent performance. This way, you save money without compromising on quality
Delivery & Shipping
Delivery & Shipping
We guarantee fast and reliable shipping so that your machine is ready for use again as quickly as possible. Thanks to our efficient logistics partners and extensive stock, most items are immediately available and shipped within the shortest possible time. For orders over €500, shipping is also free, so you save not only time but also money.
HOMAG HOMAG ELTEC CPU Card BAB40 without graphics without SCSI Part...
Description
HOMAG ELTEC CPU Card BAB40 without Graphics without SCSI Part No 2-083-03-0092 2083030092 BAB 400 4 Software PMON 3 012 05 1940
HOMAG ELTEC CPU Card BAB40 without Graphics without SCSI Part No 2-083-03-0092 2083030092 BAB 400 4 Software PMON 3 012 05 1940
HOMAG
Original ELTEC CPU control card BAB40 for HOMAG CNC machines without graphics and without SCSI. Includes PCMCIA Flashdisk 110 MB. Documented software version PMON BAB40 Version 3 1 6 20 according to EPROM labeling.
The offered item is an original ELTEC BAB40 CPU control card based on the BAB 400 4 platform for HOMAG CNC woodworking machines. The card, as the central processing unit, takes over the machine's sequence control, communication with the modules, and the processing of the machine logic.
The HOMAG part number indicated on the card is 2-083-03-0092, and additionally without hyphens, 2083030092. Both numbers uniquely identify the same module and are crucial for identification.
The software version is clearly documented on the EPROM chips and is clearly visible in the photos. The EPROM has the following marking:
PMON BAB40 without graphics
3 012 05 1940
Version 3 1 6 20
Technical Data
- Manufacturer ELTEC used for HOMAG
- Card type BAB40 without graphics without SCSI
- Platform BAB 400 4
- HOMAG part number 2-083-03-0092 and 2083030092
- Software version PMON BAB40 3 012 05 1940 Version 3 1 6 20
- Processor 32 Bit CPU Intel 486 Class
- System controller LSI Symbios
- Communication controller Zilog
- Logic components Programmable logic from Lattice
- Working memory 8Mx32 RAM module plus additional memory chips
- Mass storage SanDisk PCMCIA Flashdisk 110 MB
- Mounting type Plug-in card for control cabinet control
Application Area
HOMAG CNC woodworking machines with ELTEC BAB40 control
Suitable as a replacement or exchange card for identical machine configurations
Spare parts stocking for older HOMAG control generations
Highlights
Highlights
Original ELTEC CPU card for HOMAG
Software version documented directly from EPROM
Industrial design with 32-bit processor and separate communication components
PCMCIA Flashdisk already included
Scope of Delivery
A SanDisk PCMCIA Flashdisk with 110 MB is installed as mass storage, which serves as a replacement for a classic hard drive and contains the control software and machine data.
Processor and Electronics
Processor and Electronics
The CPU card is equipped with a 32-bit industrial processor of the Intel 486 class, mounted under a passive heat sink. This main processor handles the complete control logic of the machine. Furthermore, several specialized industrial components are installed:
An LSI Symbios system controller for bus and memory management
Zilog controllers for serial communication and control tasks
Programmable logic components from Lattice for implementing machine-specific I/O functions
The main memory is realized via plugged-in RAM modules, including an 8Mx32 memory chip and additional NEC RAM chips. This architecture is designed for continuous use in an industrial environment.
ELTEC HOMAG CPU Card BAB40 without Graphics without SCSI BAB 400 4
SanDisk PCMCIA Flashdisk 110 MB
Delivery as shown in the pictures
Manufacturer HOMAG
Manufacturer
Part Number 2-083-03-0092-3
Part Number
-
Condition
-
Manufacturer Part No.
-
Product Category
-
Manufacturer
-
Weight
Payment & Security
Payment methods
Your payment information will be processed securely. We do not store credit card details nor do we have access to your credit card information.
Our Most Popular Categories
